Fortnite · FPS
Aim
By Scr3wZ
Aim is a Fortnite Cronus Zen script featuring aimbot aim assist, rapidfire, expoantirecoil, and bloomreducer, built for PS5, Xbox.
premium
$45.00
Updated 2026-03-25T16:59:41.631Z
Platform
PS5, Xbox
Difficulty
beginner
Compatibility
Fortnite Chapter 6
Overview
Aim is a Cronus Zen script for Fortnite on PS4 and PS5 by SCR3WZ. It layers three simultaneous aim assist combos on the right stick — each applying ±10 oscillations with slightly different step timing (1ms, no wait, and no waits respectively) — all stopping when the right stick exceeds 30. Exponential anti-recoil pushes the right stick Y-axis down by 45 while both triggers are held, tuned specifically for Fortnite's Exponential look input mode. A bloom reducer oscillates the left stick in a small pattern during play. Instant edit reset is on by default; rapid fire and pickup macro are included but off.
What Is Included
- AA1 — ±10 RX/RY oscillation at 1ms delay, stops when stick exceeds 30 (always on)
- AA2 — ±10 RX/RY oscillation with no wait on first step, stops when stick exceeds 30 (always on)
- AA3 — ±10 RX/RY oscillation with no waits, stops when stick exceeds 30 (always on)
- Exponential Anti-Recoil — pushes RY down by 45 while L2+R2 held, stops on stick movement (default on, value 45)
- Bloom Reducer — oscillates LX -12→+14 / LY +8→-9 at 50ms/30ms intervals (default on)
- Instant Edit Reset — on Edit press tracks state; on Reset press fires a confirm to auto-reset (default on, EditHold=FALSE)
- Rapid Fire — 10ms on/10ms off R2 cycle while firing (default off — designed for zero builds)
- Pickup Macro — 1ms press/release on Pickup button (default off)
- PlayStation on Xbox compatibility toggle — swaps PS4 touchpad and share button for DS4/5 on Xbox/PC (default off)
- Hair Trigger — LT snaps to 100 on any input above 10 (always on)
- Block Rumble — suppresses all controller vibration (always on)
- RGB cycling LED — smooth manual red/green/blue fade cycle (always on)
- Custom OLED startup bitmap (SCR3WZEXPO image)
How Aim Works
All three aim assist combos run simultaneously every frame, each pushing the right stick through a small ±10 oscillation pattern with slightly different timing — the combined layered effect creates a persistent pull that halts the moment the right stick is intentionally moved beyond 30. The ExpoAntiRecoil function fires when both triggers are held, pushing the right stick Y-axis downward by the configured value. This is calibrated for Exponential look input in Fortnite, where the stick-to-camera response curve differs from Linear — using Linear input will produce a different feel. The bloom reducer runs a steady left stick oscillation pattern during play. Instant edit reset tracks edit presses and automates the confirm on reset. All features except rapid fire and pickup macro are active by default.
Compatibility Matrix
| Requirement | Status |
|---|---|
| Game target | Fortnite |
| Platform | PS5, Xbox |
| Device | Cronus Zen |
| Compatibility target | Latest Version |
| Last tested | 2026-03-06 |
Compatibility Notes
This script is specifically tuned for Exponential look input mode in Fortnite. Using it with Linear input will give different results and anti-recoil may not compensate correctly. Set Fortnite's look input to Exponential before using this script. Button binds assume standard Fortnite PS4 layout: Fire=R2, ADS=L2, Edit=LS, Pickup=X. No PVAR save — settings reset on every script load.
Setup Guide
- In Fortnite settings, set look input to Exponential — this is required for the anti-recoil to work correctly.
- Update Cronus Zen firmware and open Zen Studio.
- Open the script in Zen Studio and adjust values if needed (ExpoAntiRecoil, Aa1/Aa2/Aa3).
- To enable rapid fire, set RapidFire=TRUE. To enable pickup macro, set PickUpMacro=TRUE.
- If using DS4/5 on Xbox or PC, set PlayStationOnXbox=TRUE.
- Compile and load the script into a Zen slot.
- Connect your controller and confirm the active slot.
- The OLED will display the SCR3WZ startup image and the LED will begin the RGB cycle.
- All active features run automatically — no further input required.
Best Settings for Fortnite
Defaults: ExpoAntiRecoil=45, Aa1/Aa2/Aa3=10, stop threshold=30. Start with defaults and Exponential look input set in Fortnite. If aim assist feels too aggressive or stops too easily, adjust Aa values downward or raise the stop threshold. If anti-recoil overshoots, lower ExpoAntiRecoil in small steps.
Tuning Guide
| Feature | When To Adjust | Expected Effect |
|---|---|---|
| ExpoAntiRecoil (default 45) | When recoil is not compensated or overshoots | Adjusts downward RY push while ADS+fire — requires Exponential input mode |
| Aa1 / Aa2 / Aa3 (all default 10) | When aim assist layers feel too strong or weak | Adjusts oscillation magnitude for each of the three combos independently |
| SCR3WZDELAY (default 1ms) | When aim timing feels off | Changes the step delay in AA1 (AA2 and AA3 have no delay by design) |
| Stop threshold (default 30) | When aim assist cuts out too easily | Edit the >30 conditions in each combo check to widen or narrow the movement gate |
Tips for Best Results
- This script requires Exponential look input mode in Fortnite settings — set this before loading.
- Edit ExpoAntiRecoil (default 45) to tune recoil compensation — it only activates while holding L2 and R2 simultaneously.
- Edit Aa1, Aa2, and Aa3 (all default 10) to adjust the three aim assist layer strengths independently.
- Rapid fire is off by default — set RapidFire=TRUE in the script to enable it (designed for zero build modes).
- Pickup macro is off by default — set PickUpMacro=TRUE in the script to enable it.
- If using a DualSense or DS4 on Xbox or PC, set PlayStationOnXbox=TRUE to fix the touchpad button mapping.
Troubleshooting
Anti-recoil not working correctly
Confirm Exponential look input is set in Fortnite settings — the script is tuned for this mode
Aim assist stopping immediately
Aim assist stops when right stick exceeds 30 — reduce Aa1/Aa2/Aa3 if it's too sensitive to stick movement
Recoil compensation too strong
Lower ExpoAntiRecoil from 45 in the script
Rapid fire not activating
Set RapidFire=TRUE in the script before loading
Touchpad not working on Xbox
Set PlayStationOnXbox=TRUE to swap the PS4 touchpad and share button mappings
Changelog
- 2026-02-22: Published profile refresh for Fortnite Chapter 6.
- 2026-03-06: Validation run completed with latest test checklist.
Frequently Asked Questions
Why does this require Exponential input mode?
The anti-recoil value (45) is calibrated for Exponential look input — Linear input has a different curve and the compensation will feel different
Can I use Linear input instead?
Yes, but adjust ExpoAntiRecoil down significantly as the feel and pull will differ
How do I enable Rapid Fire?
Set RapidFire=TRUE in the script before loading — it is designed for zero build modes
Do settings save between sessions?
No — there is no PVAR save; reload to restore defaults
What does the OLED show?
A custom SCR3WZ bitmap image on startup — no text displayed
Does the script work on Xbox?
Set PlayStationOnXbox=TRUE if using a DS4 or DualSense on Xbox or PC to fix the touchpad button mapping
Trust and Support
- Three simultaneous layered aim assist combos with movement-based stop gates
- Exponential-tuned anti-recoil for Fortnite's Exponential look input mode
- Bloom reducer during play
- Instant edit reset on by default
- Rapid fire and pickup macro included (off by default)
- PlayStation on Xbox compatibility toggle
- RGB cycling LED and custom OLED startup bitmap