Acid Aim+ V1 — Fortnite Cronus Zen Script
Z Cronus Zen Scripts

Fortnite · FPS

Acid Aim+ V1

By Acid

Acid Aim+ V1 is a Fortnite Cronus Zen script featuring ai enhanced aim, 60 adjustable settings, ai learning, and prediction, built for PS5, Xbox.

premium

$40.00

Updated 2026-03-25T16:59:42.340Z

Platform

PS5, Xbox

Difficulty

intermediate

Compatibility

Fortnite Chapter 6

Overview

Acid Aim+ V1 is a PS4/PS5 Cronus Zen all-in-one FPS script by Acid Scripts. It features 60 configurable settings across aim assist, recoil, firing, movement, sensitivity, and remapping — all managed from an OLED menu without a PC. The aim system uses AI learning, motion prediction, and adaptive recoil that adjusts based on your live shooting accuracy. A stat tracker shows accuracy, current streak, and best streak on the OLED. All 60 settings save via a bit-packed PVAR system supporting 4 profiles.

What Is Included

How Acid Aim+ V1 Works

While aiming (L2 > 50%), the script reads right stick input and applies an aim pull toward centre proportional to how close the stick is to the lock range threshold — scaled by Aim Strength. AI Learning monitors shooting accuracy in real time and amplifies the aim pull during active streaks. Motion Prediction adds velocity-based stick offset to lead moving targets. Adaptive Recoil adjusts vertical compensation based on session accuracy. Recoil Control adds vertical and optional horizontal offset while firing (R2 > 50%). Rapid Fire pulses R2 on/off at Rapid Speed intervals. The OLED shows the script title and version at idle, and displays accuracy, streak, and best streak during active play if Track Stats is on. Opening the menu (L2 fully held + Options) cycles through all 60 settings via D-Pad Left/Right. D-Pad Up/Down changes each value with hold-acceleration support. Releasing Circle saves everything via bit-packed PVAR.

Compatibility Matrix

RequirementStatus
Game targetFortnite
PlatformPS5, Xbox
DeviceCronus Zen
Compatibility targetLatest Version
Last tested2026-03-06

Compatibility Notes

This script uses PS4 button constants and is compatible with PS4 and PS5. It is not locked to a specific FPS title and can be used across multiple games. Adjust Deadzone, Sensitivity, and Recoil values to match your specific game and weapon. Use Profile Num to save separate configurations per game or loadout.

Setup Guide

  1. Update Cronus Zen firmware and open Zen Studio.
  2. Import the script into Zen Studio.
  3. Load the script into a Zen slot.
  4. Connect your PS4/PS5 controller and confirm the active slot.
  5. Hold L2 fully (above 85%) and tap Options to open the settings menu.
  6. Use D-Pad Left/Right to navigate to the setting you want to change.
  7. Use D-Pad Up/Down to adjust the value — hold for faster repeat.
  8. Release Circle to close the menu and save all settings.
  9. Test aim assist in practice — tune Aim Strength and Lock Range as needed.
  10. Enable AI Learning and Predict Enable for adaptive aim performance.
  11. Enable Track Stats to monitor accuracy and streaks on the OLED during play.
  12. Use Profile Num to save and switch between up to 4 configurations.

Best Settings for Fortnite

Defaults on load: Aim Assist On, Aim Strength 85, Lock Range 25, Recoil Control On, Recoil Vertical 15, Rapid Fire On (Speed 12), Reload Cancel On, Breath Control On, AI Learning On (Aggression 75), Predict Enable On (Strength 70), Adaptive Recoil On, Auto Adjust On, Track Stats On, Advanced LED On. Start with defaults and tune Recoil Vertical and Lock Range to your weapon before adjusting anything else.

Tuning Guide

FeatureWhen To AdjustExpected Effect
Aim Strength (85 default)When aim pull feels too strong or weakControls how hard the aim snaps toward target centre
Lock Range (25 default)When aim assist activates too early or too lateSets the stick distance threshold that triggers aim assist
Recoil Vertical (15 default)When recoil pulls too highCompensates vertical climb during sustained fire
Recoil Horizontal (5 default)When recoil drifts left or rightCompensates horizontal drift (0 = none, pattern 1 = left, pattern 2 = right)
Rapid Speed (12 default)When rapid fire rate is wrong for your weaponSets the R2 pulse cycle speed (lower = faster)
AI Aggression (75 default)When AI boost feels too aggressiveControls how much kill streaks amplify aim assist
Predict Strength (70 default)When prediction overshoots or undershootsControls how much stick velocity offsets the aim lead
Deadzone L / R (10 default each)When stick drift is presentFilters out small stick inputs below threshold
Sens Curve (0 default)When sensitivity response feels linear or sluggishApplies one of 4 non-linear sensitivity shaping presets

Tips for Best Results

Troubleshooting

Aim assist not working

Ensure Aim Assist is On and L2 is held above 85% — aim assist only activates while aiming

Recoil not compensating correctly

Adjust Recoil Vertical (default 15) and Recoil Pattern to match your weapon

Rapid fire misfiring

Adjust Rapid Speed (default 12, range 8–20) to match your weapon's fire rate

Stats not showing on OLED

Enable Track Stats in the menu

Menu not opening

Ensure L2 is fully pressed (above 85% threshold) before pressing Options

Settings not saving

Settings save on Circle release — ensure you release Circle to exit the menu

Changelog

Frequently Asked Questions

Is this locked to one game?

No — it works across PS4/PS5 FPS titles, tune settings per game

How do I open the menu?

Hold L2 fully (above 85%) and press Options

How do I save?

Release Circle to close the menu — all settings save automatically

What does Panic Mode do?

Pressing L3+R3 temporarily boosts Aim Strength to 100 and Recoil Vertical to 50

What are the 4 profiles for?

Profile Num 0–3 lets you save and load separate full configurations

Does AI Learning persist?

No — AI tracking resets each session; base settings persist via PVAR

Trust and Support