Fortnite · FPS
AA Only
By Legacyz
AA Only is a Cronus Zen script for NBA 2K24 on PS4 and PS5 by Legacyz. It applies a continuous right stick aim assist nudge — automatically pushing the right stick RX and RY to a fixed value of 8 on a 50ms loop.
premium
$25.00
Updated 2026-03-25T16:59:42.479Z
Platform
PS5, Xbox
Difficulty
beginner
Compatibility
Fortnite Chapter 6
Overview
AA Only is a Cronus Zen aim assist script for NBA 2K24 on PS4 and PS5 by Legacyz. It runs a continuous right stick nudge loop — pushing RX and RY to a fixed value of 8 every 50ms. The nudge direction tracks left stick position. When the right stick is moved intentionally (abs RX + abs RY > 15) or the left stick is pushed past the threshold, the assist combo stops automatically. No menu, no OLED, and no configuration required.
What Is Included
- Continuous right stick aim assist nudge (RX and RY nudged to value 8)
- Left stick position tracking to set nudge direction
- Automatic disengagement when right or left stick movement exceeds threshold
- Fixed loop delay of 50ms per nudge cycle
- Always-on — runs immediately on script load with no toggle required
How AA Only Works
The script runs the LEGACYZ_AA_1_AA combo continuously from the moment it loads. Each loop cycle checks left stick X position — if LX is greater than 0, the AAX nudge value is set to 8. The RX value is set to LEGACYZ_AAX and RY is set to LEGACYZ_AAY, each held for 50ms before the next cycle. The AA() function checks whether the combined right stick magnitude (abs RX + abs RY) exceeds 15 or whether left stick values drop below -9 — if so, it stops the combo, disengaging the assist during intentional stick movement.
Compatibility Matrix
| Requirement | Status |
|---|---|
| Game target | Fortnite |
| Platform | PS5, Xbox |
| Device | Cronus Zen |
| Compatibility target | Latest Version |
| Last tested | 2026-03-06 |
Compatibility Notes
AA Only applies a fixed right stick nudge and is designed specifically for PS4/PS5 controller input in NBA 2K24. The nudge value (8) and loop delay (50ms) are fixed in code and cannot be adjusted without editing the script in Zen Studio.
Setup Guide
- Update Cronus Zen firmware and open Zen Studio.
- Import the script into Zen Studio.
- Load the script into a Zen slot.
- Connect your PS4/PS5 controller and confirm the active slot.
- The aim assist runs automatically — no further setup required.
Best Settings for Fortnite
No configurable settings. The nudge value is fixed at 8 and the loop delay is fixed at 50ms. These are set in code and cannot be changed without editing the script in Zen Studio.
Tuning Guide
| Feature | When To Adjust | Expected Effect |
|---|---|---|
| Aim Assist | After baseline setup | Improves control consistency |
| Weapon Tracking | After baseline setup | Improves control consistency |
| Movement Macros | After baseline setup | Improves control consistency |
Tips for Best Results
- The aim assist runs automatically as soon as the script is loaded — no toggle needed.
- The assist disengages automatically when the right stick is moved beyond the detection threshold (abs value > 15) or when the left stick is pushed significantly.
- No setup or adjustments are required — the script is ready to use immediately.
Troubleshooting
Assist not disengaging during manual aim
Move the right stick or left stick beyond the threshold — the combo will stop automatically
Script not running
Ensure the Cronus Zen slot with the script is active and the controller is connected
Changelog
- 2026-02-22: Published profile refresh for Fortnite Chapter 6.
- 2026-03-06: Validation run completed with latest test checklist.
Frequently Asked Questions
Does this script require any setup?
No — it runs automatically as soon as the slot is active
Will it interfere with manual aiming?
No — it disengages automatically when right or left stick movement exceeds the detection threshold
Can I adjust the nudge strength?
Not without editing the script in Zen Studio — the value is fixed at 8
Is there a toggle or menu?
No — this is an always-on assist with no menu or OLED
Trust and Support
- Always-on — no toggle or setup required
- Auto-disengages during intentional stick input
- Fixed nudge value of 8 with 50ms loop — lightweight and consistent